Creality · FDM CoreXY
K2 Plus
Large engineering parts on a smaller budget than the H2D.
$1,299approx. USD
- 350 × 350 × 350 mm
- 600 mm/s
- Enclosed
- Multi-colour
Ease7
Speed9
Materials9
Openness4
Value7
Bambu Lab · FDM CoreXY dual-nozzle · 2025
Bambu Lab H2D review
Big, hot and dual-nozzle: proper soluble supports without purge waste, a heated chamber, and 350 mm of bed. The current flagship.
Best for: Engineering parts, large models and small production runs.
The PIF Score
7.4PIFEase8
Speed10
Materials10
Openness3
Value6
Five axes, each out of ten, averaged with no weighting. How we score.
What we like
- Dual nozzle means clean soluble supports
- Very large heated build volume
- 350 °C hotend handles engineering polymers
What we don't
- Expensive and physically huge
- Dual-nozzle calibration adds complexity
- Overkill for hobby use
True cost
What it really costs to own in your country
Pre-filled with typical local rates. Change anything to match your own use.
Running cost / year—power · filament
Per print hour—incl. upkeep
3-year total—printer + running
Assumes ~300 W average draw while printing and a small yearly allowance for nozzles, plates and PTFE. An estimate for comparing printers against each other, not a quote.
Full specifications
| Type | FDM CoreXY dual-nozzle |
| Released | 2025 |
| Build volume | 350 × 320 × 325 mm |
| Max speed | 1000 mm/s |
| Hotend max temp | 350 °C |
| Bed max temp | 120 °C |
| Nozzle | Dual 0.4 mm hardened |
| Bed levelling | Automatic + lidar |
| Enclosure | Yes |
| Multi-material | Dual nozzle + AMS 2 Pro |
| Connectivity | Wi-Fi, LAN, microSD |
| Recommended slicer | Bambu Studio / Orca |
| Typical power draw | ~300 W while printing (our estimate) |
Specifications are the manufacturer's published figures. "Max speed" is a peak that no printer holds across a whole part, so use it for comparison and don't expect it in real print times.