Anycubic · Resin MSLA
Photon Mono M7 Pro
High-volume miniature printing where speed matters.
$429approx. USD
- 223 × 126 × 230 mm
- ~150 mm/h
- Enclosed
- Single colour
Ease6
Speed6
Materials5
Openness4
Value7
Elegoo · Resin MSLA · 2024
Elegoo Saturn 4 Ultra review
12K resolution and tilt-release peeling for fast, detailed miniatures. The detail ceiling FDM can't reach — at the cost of gloves, IPA and curing.
Best for: Tabletop miniatures, jewellery and highly detailed models.
The PIF Score
5.6PIFEase6
Speed4
Materials5
Openness5
Value8
Five axes, each out of ten, averaged with no weighting. How we score.
What we like
- Extraordinary surface detail
- Fast tilting peel mechanism
- Built-in air purifier
What we don't
- Messy, smelly workflow
- Resin needs careful handling and ventilation
- Post-processing wash and cure required
True cost
What it really costs to own in your country
Pre-filled with typical local rates. Change anything to match your own use.
Running cost / year—power · filament
Per print hour—incl. upkeep
3-year total—printer + running
Assumes ~70 W average draw while printing and a small yearly allowance for nozzles, plates and PTFE. An estimate for comparing printers against each other, not a quote.
Full specifications
| Type | Resin MSLA |
| Released | 2024 |
| Build volume | 218 × 123 × 220 mm |
| Max speed | ~70 mm/h |
| Hotend max temp | n/a |
| Bed max temp | n/a |
| Nozzle | n/a — 12K mono LCD |
| Bed levelling | Pre-levelled |
| Enclosure | Yes |
| Multi-material | No |
| Connectivity | Wi-Fi, USB |
| Recommended slicer | Chitubox / Voxeldance |
| Typical power draw | ~70 W while printing (our estimate) |
Specifications are the manufacturer's published figures. "Max speed" is a peak that no printer holds across a whole part, so use it for comparison and don't expect it in real print times.